[[雑記]]
#setlinebreak(on)

Cisco Router/Switch
設定は割愛するがACLのシーケンス番号番号を振り返る例

IOS 12.4(Cisco routerでの動作例)

設定はCommit等が存在しないので
runningには即時反映。

R1#
R1#show ip access-lists
Extended IP access list TEST_ACL
    10 deny ip host 1.1.1.1 any
    20 deny ip host 2.2.2.2 any
    30 deny ip host 3.3.3.3 any
    9999 permit ip any any (1662 matches)

R1#
R1#
R1#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]

R1#
R1#
R1#show ip access-lists
Extended IP access list TEST_ACL
    10 deny ip host 1.1.1.1 any
    20 deny ip host 2.2.2.2 any
    30 deny ip host 3.3.3.3 any
    9999 permit ip any any (1662 matches)

R1#
R1#conf terminal
Enter configuration commands, one per line.  End with CNTL/Z.
R1(config)# ip access-list resequence TEST_ACL 100 100
R1(config)#end
R1#
R1#
*Mar  1 00:23:03.952: %SYS-5-CONFIG_I: Configured from console by console [#y682ec8c]

R1#show ip access-lists
Extended IP access list TEST_ACL
    100 deny ip host 1.1.1.1 any
    200 deny ip host 2.2.2.2 any
    300 deny ip host 3.3.3.3 any
    400 permit ip any any (1662 matches)

R1#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]

R1#
R1#show ip access-lists
Extended IP access list TEST_ACL
    100 deny ip host 1.1.1.1 any
    200 deny ip host 2.2.2.2 any
    300 deny ip host 3.3.3.3 any
    400 permit ip any any (1662 matches)
R1#

トップ   編集 差分 バックアップ 添付 複製 名前変更 リロード   新規 一覧 検索 最終更新   ヘルプ   最終更新のRSS